Export Pipe Fitting Packing: Corrosion Protection and CTU Checklist

Important caveat: The standard states that planned storage exceeding one year requires more than minimum physical and mechanical protection. If your project involves long-term warehousing, you must specify enhanced preservation.

Note for buyers: The ASTM page shows D3951-18 as a historical standard. Always confirm the current edition and revision status in your contract. The active version may have updates.

CTU Code: Packing and Securing Cargo Transport Units

The IMO/ILO/UNECE Code of Practice for Packing of Cargo Transport Units (CTU Code) is a non-mandatory global code that provides guidance for packing and securing cargo in containers and other intermodal transport units. It applies throughout the entire intermodal transport chain and is intended for those who pack, receive, and unpack units.

The CTU Code addresses:

• Safe stowage and securing of cargo to prevent movement during transport.
• Training of personnel involved in packing and unpacking.
• Packing of dangerous goods (though pipe fittings are usually not dangerous).
• Due diligence in selecting CTU service providers (see MSC.1/Circ.1531).

While the CTU Code is not mandatory, it is widely recognized as best practice. Following it helps reduce risks of cargo damage, container damage, and even accidents.

Corrosion Protection: What to Specify

Pipe fittings, especially carbon steel, are prone to corrosion during transit. A robust corrosion protection plan includes:

• Preservation: Apply appropriate rust preventatives, such as VCI (Vapor Corrosion Inhibitor) paper, oil, or other coatings. The choice depends on material, route, and storage duration.
• Packaging: Use moisture-barrier bags or wraps, desiccants, and cushioning materials.
• Exterior packing: Use wooden crates, cartons, or pallets that provide mechanical protection and facilitate handling.

Caution: There is no universal VCI duration or guarantee of corrosion-free arrival. The effectiveness depends on route, storage conditions, material, coating, humidity, and package integrity. Always validate with your supplier through testing or past performance.

Pre-Shipment Inspection Checklist

Before shipment, verify the following:

• Packing specification: Confirm that the packing method matches the contract and any applicable standards (e.g., ASTM D3951).
• Preservation: Check that corrosion protection is applied correctly and is appropriate for the expected transit time and conditions.
• Marking: Ensure all packages are marked with required information: product description, size, heat number, PO number, and handling symbols.
• Unitization: Verify that packages are properly palletized or unitized for efficient handling and to prevent movement.
• Container loading: If using containers, ensure they are clean, dry, and free from damage. Follow CTU Code guidance for securing cargo.
• Documentation: Review packing lists, certificates, and any inspection reports.

Common Risks and How to Mitigate

• Corrosion due to inadequate preservation: Specify preservation methods that match the transit route and duration. For long storage, require enhanced protection.
• Mechanical damage from poor securing: Follow CTU Code guidelines for lashing and bracing.
• Moisture ingress: Use desiccants and moisture barriers, and ensure containers are watertight.
• Non-compliance with contract: Ensure the packing standard is clearly stated in the RFQ and purchase order.

Procurement and RFQ Inputs

When requesting quotes, include:

• Packing standard: e.g., "Packing per ASTM D3951, current edition."
• Corrosion protection requirements: e.g., "VCI paper and desiccant for 6-month sea transit."
• Export packing details: e.g., "Plywood crates, palletized, with ISPM-15 marking."
• Marking requirements: e.g., "Mark each package with heat number and PO."
• Inspection requirements: e.g., "Pre-shipment inspection by third party."

Conclusion

Proper export packing is not just about wrapping; it is a critical part of ensuring product integrity and project success. By referencing ASTM D3951 and the CTU Code, and by specifying clear requirements, you can minimize risks and ensure your pipe fittings arrive ready for installation.

For more information on pipe fittings and flanges, visit our products page or contact us for specific packing requirements.

Sources

• https://www.astm.org/d3951-18.html
• https://www.imo.org/en/ourwork/safety/pages/ctu-code.aspx